Setting Up the System

Default Settings: Saved values loaded when the system first starts up or reboots.
Active Settings: Values currently in use (which may be temporary until the next reboot).

System Setup Header

Once the system has been onboarded and the controller is booting normally, you can begin to configure the system for your particular hardware and needs. This includes options like the number of LEDs, sensor settings and other global options.

This section covers the core configuration of your hardware and default settings:

Web App Overview - Accessing the app and understanding the interface.
Initial Hardware Configuration - Setting up the system for your exact hardware.
Sensor Calibration - See raw readings from your sensor(s). Used to assist in setting zone distances.

💡 Configuration Logic
It is important to understand that the system manages two distinct “sets” of settings:

Default Settings: Saved values loaded when the system first starts up or reboots.

Active Settings: Values currently in use (which may be temporary until the next reboot).

This distinction is covered in more detail in the Web App Overview.

<- Previous: The Boot Process Next: Web App Overview ->